| 1 min readScience & Engineering

Wireless sensors track chemistry as it happens

A new system uses chips smaller than a grain of rice to wirelessly track temperatures inside chemical reactions, potentially speeding drug discovery and materials development.

Three chemistry researchers in blue lab coats and safety glasses study a laptop beside a fume hood, where one uses a pipette on a glowing sample tray.
Stanford chemist Song Lin (top right) and doctoral students Sukwoo Lee (left) and Evan Weingarten developed a system to wirelessly monitor temperatures during chemical reactions. | Jim Gensheimer
An array of small sample vials sits in a glowing orange and purple reactor block in a darkened lab, with a laptop behind it.
Chips smaller than a grain of rice wirelessly report reaction temperatures every half-second, helping researchers detect stalled reactions and excessive heat. | Jim Gensheimer

In brief

  • Researchers developed a “reaction telemetry” system that uses very small chips that can sit inside individual test tubes and track heat during chemistry experiments.
  • The chips can collect a data point every half-second. Prior reaction monitoring methods gave only one result at the end or required more costly or invasive methods.
  • By increasing the speed and volume of data collected, the system could enable faster drug discovery and material development, among many other applications.

A fleck-sized chip at the bottom of a test tube can provide researchers with data for every second of a chemical reaction while it is occurring.

The advance, published in the journal Science, promises to vastly increase the speed of chemistry-related research, including discovery of new drugs and development of new materials.

“We’ve essentially given these chemical reactions, and the molecules in them, their own cell phones,” said Song Lin, a professor of chemistry in Stanford’s School of Humanities and Sciences. “In a sense, we are trying to wirelessly communicate with these chemical reactions so they can tell us how they’re doing, which helps us understand their progress and fix any problems.”

Lin credits this advance to interdisciplinary collaboration among chemists in his lab with physicists and electrical engineers from Cornell University, where Lin worked before coming to Stanford in July. The team developed this “reaction telemetry,” the automated collection and transmission of data during a chemical reaction, by adapting microelectronic chips, called Optical Wireless Integrated Circuits, to work with chemistry experiments. The chips, which are each smaller than a grain of rice, can be placed inside test tubes to detect temperature and heat exchange and then wirelessly transmit that data to a computer throughout the reactions.

A US penny shown beside a scattered cluster of tiny red square chips, each far smaller than the coin.

The chips used in the reaction telemetry system are called Optical Wireless Integrated Circuits, shown here next to a penny for scale. Each chip is 0.5 mm in size and powered by light. It can measure temperature and communicate optically (the red blinking seen in the video) with an onboard laser. | Michael Reynolds, OWiC Technologies

Tiny devices deliver big data

Prior to this technology, researchers had few good options for reaction monitoring: conduct intrusive sampling during a reaction; use customized, expensive instruments; or, more typically, wait until a reaction was finished to analyze the result, which produced a single data point. These chips, which are basically very small pieces of silicon semiconductor covered with a chemically resistant material, offer a cost-effective, nonintrusive way to get insights into the reaction as it evolves.

Chemical experiments are often done in large batches of 96 test tubes so researchers can study many reactions at once. While these batches save time, the analysis is usually a bottleneck, Lin said. A sample of each completed reaction would have to be analyzed in a separate instrument, and each sample’s analysis could take from several minutes to hours. For instance, a batch of 96 reactions could take a couple days to process, and it would yield only 96 data points, one for each reaction.

With the new system, the microelectronic chips can relay a data point every half-second for every test tube, so after an hourlong reaction, researchers have nearly 700,000 data points – or 7,200 for each of the 96 test tubes.

Demonstrated advantages

For this study, co-first authors and Stanford doctoral students Sukwoo Lee and Evan Weingarten ran experiments to test how having this real-time data worked in different scenarios.

In one, the system was used to detect problems with catalytic reactions. Sometimes, a catalyst – a substance that speeds up or allows a reaction to occur – can become “poisoned,” meaning something in the chemical mixture stops it from working and shuts down the reaction.

We’ve essentially given these chemical reactions, and the molecules in them, their own cell phones.
Song LinProfessor of Chemistry

To learn more, the researchers ran a set of experiments with a potential catalyst poison in each test tube. Information from the chips showed whether the poison shut down the reaction. Since the chips relayed so much data, the researchers could often understand why the reaction stopped. This knowledge allows researchers to adjust the makeup or conditions of a reaction to exclude the poison or inhibit it.

In another scenario, the team used the system to detect when a reaction was producing too much heat, which poses a safety issue. By first running the experiment on a small scale with the real-time data from the chips, researchers could see when a reaction generates a lot of heat and how it might be “tuned” or adjusted so that it generates less.

The abilities of this system are not limited to detecting heat. The researchers envision that these wireless microelectronic devices could be designed to measure a host of different factors, including electrical conductivity, light transmission, and acidity. The system could also be used in other scientific fields that need a high throughput of analysis, that is, when a large volume of information needs to be collected and processed quickly.

“Now that we can design these circuits to understand chemistry, there are endless possibilities,” Lin said.

For more information

Other co-authors include researchers affiliated with Cornell University, Emory University, and OWiC Technologies.

This research received support from the National Science Foundation, the National Institutes of Health, and the Kwanjeong Educational Foundation.

Competing interests statement: At OWiC Technologies, co-authors include Alejandro Cortese, co-founder and chief executive officer; Alyosha Molnar, co-founder and lead circuit designer; and Paul McEuen, co-founder and chief technology officer. Lin also serves as scientific adviser at OWiC Technologies. Cortese, Molnar, and McEuen are inventors on US Patent no. 12,039,389 and related patents and applications (“Wireless, optically powered optoelectronic sensors”), assigned to Cornell University. Cortese, Molnar, McEuen, and Kevin Sun are inventors on Patent Application no. PCT/US24/45791 (“Systems and methods for driving a light emitter”), filed by OWiC Technologies.

This story was originally published by Stanford School of Humanities and Sciences.

Media contact:
Sara Zaske, School of Humanities and Sciences:
510-872-0340, szaske@stanford.edu

Writer

Sara Zaske

Share this story