CONTACT: Stanford University News Service (650) 723-2558
COMMENT: Prof. Marc Levoy, Computer Science (415) 725-4089
Researchers demonstrate ability to "fax" 3-D objects
STANFORD -- Researchers at Stanford's Computer Graphics Laboratory have demonstrated the capability to make and fax three-dimensional computer models of objects that are so detailed they can be used to make accurate physical facsimiles of the original.
Such an ability has a number of potential applications, including computer graphics for movies and video games, home shopping, and the duplication of rare artifacts or engineering prototypes.
During the week of Jan. 22, the researchers scanned a 6-inch-high plastic sculpture of a "happy Buddha" and converted it into a 3-D computer model - a process that took about six hours. They then transmitted the model electronically to 3-D Systems in Valencia, Calif., a company that uses a commercial process called stereolithography to create plastic models. Over the weekend the company created a facsimile - a process that took 12 to 15 hours - and mailed it to the researchers.
According to Marc Levoy, professor of computer science and electrical engineering and head of the 3-D fax project, the basic process began with placing the Buddha on a black platform. A line of sparkling, ruby-red light traced the statue's surface as the platform carried it through the plane of laser light. Scans were made from dozens of different orientations to get enough information to convert them into a highly detailed three-dimensional computer model. Once such a model is created, it can be sent electronically to factories that have the equipment to convert it into a physical object.
The key step in the 3-D fax process is producing high-quality, three-dimensional computer models of physical objects. That is the area on which the Stanford researchers have concentrated. Several years of effort have enabled them to generate 3-D computer models in a fraction of the time, and with far greater fidelity, than is currently possible.
Another application for these models is in Hollywood movies. Since their introduction in the film Jurassic Park, three-dimensional computer models increasingly are being used in the movie industry. The recent movie Toy Story was the first full-length feature film entirely produced through computer animation. Interest from commercial operations, including Industrial Light and Magic, means that the Stanford modeling techniques are likely to appear in movies in a few years in the form of more realistic and detailed computer-made creatures and scenery.
Still other potential applications:
A critical obstacle that must be overcome to make such applications possible is reducing the time and expense involved in creating 3-D models. In Toy Story, the three-dimensional computer models of the toys, people and animals were created by artists working directly from their imaginations, a process that took dozens of people working for about a year.
Another way to generate these models is to begin with a physical object. A number of companies currently generate computer models from physical objects by hand. Individuals painstakingly digitize the surface of physical models using touch probes, a process that takes days.
Levoy's group has been working for several years to automate this process. They begin with a laser range scanner. By illuminating the object with laser light coming from one angle and recording it in a video camera from another angle, the scanner determines the distance of each point on the line of light by the process of triangulation. This information is stored in a "range image" that consists of a series of pixels, or points in a plane, each of which is associated with the distance of the surface at that point. There are a variety of different types of range scanners, priced from $1,000 to more than $50,000, that produce such images.
Going from range data to seamless, three-dimensional images is a complex process. Researchers must combine range images taken from a number of different viewpoints. The more complex the object, the more range images they need.
In their first effort, postdoctoral student W. Greg Turk, who is now at the University of North Carolina, began by converting each range image into a three-dimensional irregular polygon mesh that traces the object's surface as seen from each viewpoint.
Next, Turk developed an algorithm that aligns the different meshes accurately. There is frequently considerable overlap between meshes, so he also created a program that "eats away" at the mesh boundaries until the overlaps are eliminated. Finally, he developed a routine that "zippers" the different meshes together, filling in gaps with new polygons as needed.
This produces a seamless 3-D mesh. These meshes can be very fine, with a single model containing hundreds of thousands of polygons. Nevertheless, the algorithms that Turk developed can construct such a mesh in a matter of hours.
"The polygon mesh does a pretty good job of capturing the surface, but it fails at extreme corners and sharp points," Levoy said. Turk's work was presented at the 1994 Siggraph meeting and Cyberware, a scanner manufacturer, now distributes it with their products.
Since then, however, the Stanford researchers have developed a method that is as fast as the zippering approach, does not have its limitations, and can capture detail as small as 0.2 millimeters.
This "volumetric" approach - developed by Brian Curless, a doctoral student in electrical engineering - begins by dividing up the space around the object into thousands of tiny cubes, dubbed voxels or volume pixels. Each voxel can have one of three values: occupied, unoccupied and occupancy unknown. If a voxel is occupied, it is on the surface of the object.
Curless developed an algorithm that takes the information in a range image and determines the state of the voxels that are visible from the image's viewpoint. Each successive range image fills in more of the voxels until a complete, three-dimensional representation of the object is built up. The result is a fuzzy, or probabilistic, representation of the object.
The last step is to extract the "most probable" surface from this representation using a contour extraction algorithm, called the marching cubes method by the researchers. The algorithm's author is Bill Lorensen, a senior scientist from General Electric, who is spending six months at Stanford working with Levoy and his students.
Computer Graphics Laboratory
Computer Graphics Laboratory
Computer Graphics Laboratory
Researchers in Stanford's Computer Graphics Laboratory have demonstrated the capability to fax three-dimensional objects. The three photos illustrate this process. The first (original) was taken of the original happy Buddha statuette. The second (model) shows the 3-D computer model that was made of the object. The third (replica) was taken of a plastic facsimile made from the computer model after it was transmitted to a commercial stereolithography company in southern California.
Download this release and its related files.
The release is provided in Adobe Acrobat format. Any images shown in the release are provided at publishing quality. Additional images also may be provided. Complete credit and caption information is included.
© Stanford University. All Rights Reserved. Stanford, CA 94305. (650) 723-2300.